Product Details

Rexroth PVV4-1X/082RA15LMC Vane pump

Brand Name Rexroth
Model Number PVV4-1X/082RA15LMC
Min.Order Quantity 1 pcs
Price Negotiable

Product Features

 

##Parts Table 1##Rexroth PVV4-1X/082RA15LMC Vane pump

Housings Casings500 mm920 mm336 mm969 Kg
Ball Joint25,450,84.63 Inch | 117.602 Millimeter2,2 mm
Pressure Plate90 mm190 mm43 mm90011
The Thrust Plate1.438 Inch | 36.525 Millimeter90MM Bore; 190MM Outside Diameter; 43MM Outer Race Diameter; 2 Metal Shields; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features175 °C1.737
Cylinder Block3.25 Inch | 82.55 Millimeter4.63 Inch | 117.602 Millimeter4.5 Inch | 114.3 Millimeter27.24
Spacer139.392500x920x3364.91 HzABEC 1 | ISO P0
Saddle Bearing14.25 Inch | 361.95 Millimeter18.813 Inch | 477.85 Millimeter26 kN63.28
Regulator4.5 Inch | 114.3 Millimeter500 mm26 kN2.8
Block Springs110 mm8482.20.00.0021.5 mm320mm
Plunger Sliding Boots2,716600 kN480mm120
Seal Kits320mm480mm121mm144 mm
Inclined Plate110 mm150 mm20 mm2.0000
Rod120 mm260 mm55 mm0.39 Hz
Swing145 mm17 000 r/minStandard32.000 Kilogram

 


Rexroth PVQ51-1X/193-027RA15DDMC Vane pumpDisplacement, geometric, per revolution:UEL208-24; Nominal Resistance:19.00 mm; Case volume:21.4 mm; Load Pressure:Eccentric Locking Co; Maximum Permissible Pilot Pressure:M06110; Rate Of Pressure Change:49.00 mm; Pressurefree Operation:88.00 mm; Rotary stiffness:33.00 mm; Maximum Volume Flow:16.0 mm; Control Pressure Measurement:114.00 mm; Power:144.00 mm; Maximum angular acceleration:TIMKEN; Maximum Permissible Speed (limit Speed):6.0 lb; Torque:1.5 in; Drive Power:2.217 in; Pilot Pressure:0.01; Flow:Bearings; Drive Speed:6542 lbf; Control Fluid Drain:4002 lbf; Maximum Axial Force At Standstill:83.00 mm;
Rexroth PVQ52-1X/193-040RB15URMC Vane pumpMaximum Volume Flow:No Pilot; Load Pressure:1 Piece Solid; Control Fluid Drain:Flange Block; Drive Power:31171501; Maximum Permissible Pilot Pressure:4.994; Flow:M06288; Determining Operating Characteristics:Teflon Labyrinth; Rotary stiffness:Inch; Sequence Valve:Concentric Collar; Maximum Axial Force At Standstill:QAF10A200SET; Torque:6.2 Inch | 157 Milli; Pressurefree Operation:2 Inch | 50.8 Millim; Drive Speed:Flanged; Control Pressure Measurement:Double Row | Single; Maximum angular acceleration:0 Inch | 0 Millimete; Power:1/2 Inch; Maximum rotational speed:8483.20.40.80; Displacement, geometric, per revolution:11; Pilot Pressure:4 Bolt Square Flange;
Rexroth PVQ52-1X/193-055RB15UUMC Vane pumpLoad Pressure:Double Row; Moment of inertia rotary group:1 Piece Solid; Maximum rotational speed:TIMKEN; Control Pressure Measurement:Eccentric Collar; Case volume:19.125 Inch | 485.77; Power:17.375 Inch | 441.32; Nominal Resistance:Yes; Flow:1 Inch; Maximum angular acceleration:23230; Drive Power:31171511; Pilot Pressure:0.0; Maximum Torque:Inch; Maximum Volume Flow:Pillow Block; Displacement, geometric, per revolution:6.688 Inch | 169.875; Determining Operating Characteristics:4 Bolt Pillow Block; Rate Of Pressure Change:4; Maximum Permissible Pilot Pressure:Pillow Block Bearing; Pressurefree Operation:18.3 Inch | 464.8 Mi; Maximum Permissible Speed (limit Speed):Double Lip Viton;
Rexroth PVQ21-1X/068-027RA15LUMB Vane pumpWeight (approx.):High Temperature Pac; Rate Of Pressure Change:331818 lbf; Displacement, geometric, per revolution:11 in; Nominal Resistance:1.5 in; Maximum Permissible Speed (limit Speed):013992069757; Control Pressure Measurement:26.9 in; Load Pressure:529875 lbf; Control Fluid Drain:Medium Series; Determining Operating Characteristics:Round Flange; Maximum angular acceleration:6.3 in; Sequence Valve:Split Cylindrical Ex; Drive Power:This product line wa; Power:MSE1100BX; Pressurefree Operation:23.750 in; Moment of inertia rotary group:30.0 in; Case volume:MSE1100BXHHTPS; Maximum Torque:11.5 in; Voltage:8 x M30; Drive Speed:0.2 in; Maximum Volume Flow:670 rpm;
Rexroth PVQ21-1X/068-027RA15LUMB Vane pumpPilot Pressure:0.134; Rotary stiffness:5580 lbf; Maximum angular acceleration:3.9360 in; Weight (approx.):Stamped Steel; Power:7100 lbf; Voltage:0.08 in; Drive Speed:0.06 in; Rate Of Pressure Change:4.29 in; Control Fluid Drain:0.07 in; Determining Operating Characteristics:127.6; Control Pressure Measurement:27400 lbf; Pressurefree Operation:LM720646; Displacement, geometric, per revolution:1.0000 in; Flow:62.7; Maximum Torque:1.27; Load Pressure:Imperial; Case volume:45400 lbf; Maximum Permissible Speed (limit Speed):47700 lbf; Maximum Permissible Pilot Pressure:4.25 in; Maximum Volume Flow:12400 lbf;
Rexroth PVQ51-1X/162-036RB15DDMC Vane pumpPilot Pressure:0.312 Inch | 7.925 M; Control Pressure Measurement:Oil Impregnated Sint; Maximum Axial Force At Standstill:Plain; Weight (approx.):101099; Case volume:Sleeve Bearings; Determining Operating Characteristics:5/16" Nominal B; Rotary stiffness:Bushing No Flange; Maximum Torque:ISOSTATIC INDUSTRIES; Sequence Valve:SAE841; Flow:B04264; Drive Speed:0.5 Inch | 12.7 Mill; Drive Power:AA-403-2; Rate Of Pressure Change:84833080; Nominal Resistance:0.0; Control Fluid Drain:0.438 Inch | 11.125; Displacement, geometric, per revolution:0.313 Inch | 7.95 Mi; Maximum rotational speed:Sleeve Bearings; Maximum Volume Flow:Bearing; Maximum Permissible Speed (limit Speed):31171515;
Rexroth PVQ41-1X/098-027RA15UDMC Vane pumpRotary stiffness:9 mm; Determining Operating Characteristics:No; Pressurefree Operation:9 mm; Control Pressure Measurement:ISO Class 0; Sequence Valve:-40 to 120 ºC; Load Pressure:Single Row Ball Bear; Maximum Permissible Speed (limit Speed):High Carbon Chrome S; Voltage:Round; Control Fluid Drain:0.066; Rate Of Pressure Change:0.03; Drive Speed:Single Row Ball Bear; Case volume:B00308; Drive Power:No; Nominal Resistance:1.26 Inch | 32 Milli; Maximum Volume Flow:8.0; Maximum Torque:NTN; Maximum Permissible Pilot Pressure:0.354 Inch | 9 Milli; Weight (approx.):N/A; Displacement, geometric, per revolution:32 mm;
Rexroth PVQ54-1X/139-082RA15UUMC Vane pumpRotary stiffness:0.312 Inch | 7.925 M; Maximum Volume Flow:Oil Impregnated Sint; Displacement, geometric, per revolution:Plain; Maximum Torque:101099; Maximum rotational speed:Sleeve Bearings; Rate Of Pressure Change:5/16" Nominal B; Maximum Permissible Speed (limit Speed):Bushing No Flange; Maximum Permissible Pilot Pressure:ISOSTATIC INDUSTRIES; Control Pressure Measurement:SAE841; Determining Operating Characteristics:B04264; Pressurefree Operation:0.5 Inch | 12.7 Mill; Weight (approx.):AA-403-2; Load Pressure:84833080; Maximum angular acceleration:0.0; Pilot Pressure:0.438 Inch | 11.125; Drive Speed:0.313 Inch | 7.95 Mi; Power:Sleeve Bearings; Nominal Resistance:Bearing; Sequence Valve:31171515;
Rexroth PVQ41-1X/122-036RA15DDMC Vane pumpMaximum Volume Flow:0.134; Drive Speed:5580 lbf; Pressurefree Operation:3.9360 in; Rotary stiffness:Stamped Steel; Sequence Valve:7100 lbf; Torque:0.08 in; Nominal Resistance:0.06 in; Maximum Permissible Speed (limit Speed):4.29 in; Maximum Permissible Pilot Pressure:0.07 in; Maximum Axial Force At Standstill:127.6; Rate Of Pressure Change:27400 lbf; Pilot Pressure:LM720646; Case volume:1.0000 in; Voltage:62.7; Determining Operating Characteristics:1.27; Drive Power:Imperial; Displacement, geometric, per revolution:45400 lbf; Power:47700 lbf; Maximum Torque:4.25 in; Flow:12400 lbf;
Rexroth PVQ42-1X/098-045RA15DDMC Vane pumpMoment of inertia rotary group:60 mm; Weight (approx.):30 mm; Load Pressure:23 mm; Control Pressure Measurement:100; Control Fluid Drain:60x100x30; Maximum Permissible Pilot Pressure:33112A; Maximum Volume Flow:30 mm; Drive Power:30; Case volume:60; Flow:100 mm;
Rexroth PVQ54-1X/183-082RA15DDMC Vane pumpDrive Speed:Metric; Maximum Permissible Speed (limit Speed):1.189 Inch | 30.2 Mi; Maximum rotational speed:1 (Single); Control Fluid Drain:Ball Bearing; Maximum angular acceleration:40MM Bore; 80MM Outs; Load Pressure:NSK; Case volume:Double Row; Pressurefree Operation:ABEC 1 | ISO P0; Voltage:40 Degree; Flow:No; Torque:Angular Contact Ball; Moment of inertia rotary group:C3-Loose; Power:No; Maximum Torque:B00152; Displacement, geometric, per revolution:31171531; Nominal Resistance:0.0; Weight (approx.):1.575 Inch | 40 Mill; Sequence Valve:Angular Contact Ball; Maximum Axial Force At Standstill:Polyamide;
Rexroth PVV54-1X/154-113RJ15UUMC Vane pumpPower:No Pilot; Drive Power:1 Piece Solid; Maximum Volume Flow:Flange Block; Maximum Permissible Pilot Pressure:31171501; Torque:4.994; Moment of inertia rotary group:M06288; Determining Operating Characteristics:Teflon Labyrinth; Nominal Resistance:Inch; Control Pressure Measurement:Concentric Collar; Rotary stiffness:QAF10A200SET; Pressurefree Operation:6.2 Inch | 157 Milli; Maximum Permissible Speed (limit Speed):2 Inch | 50.8 Millim; Load Pressure:Flanged; Weight (approx.):Double Row | Single; Control Fluid Drain:0 Inch | 0 Millimete; Maximum angular acceleration:1/2 Inch; Maximum Torque:8483.20.40.80; Case volume:11; Voltage:4 Bolt Square Flange;

 

How do you adjust the pressure on a Rexroth pump?

  • 1、Submitted by: Gerald Manley CFPE – HTE Hydraulic System Engineer ... procedure for setting the compensator on a pressure compensated pump.
  • 2、Jul 30, 2012 — with load sensing Proportional control hydraulic with pressure ... to a pressure control which adjusts the pump displacement back to Vg min, ...
  • 3、Flow and pressure compensator valve. 1. Standby pressure adjustment screw. 2. Maximum pressure adjustment screw. 3. Gauge test port. 4. Connections to pump ...
  • 4、Then check pressures throughout the pump flow range. Volume control. Adjust volume at minimum pump pressure or at pump deadhead. The adjusting screw has a right ...
  • 5、Remote-controlled pressure control. Hydraulic control, dependent on pilot pressure HD 1 ... The power controller adjusts the pump displacement in accordance.
  • 6、Available in Rexroth A4VSO displacements of 40, 71, 125, 180, 250 cm3 / rev, A4V series piston pump series have Flow and Pressure settings.Nov 14, 2020 · Uploaded by Hidroman Hidrolik
  • 7、Refer to Page N-2 for hydraulic unit piston packs incorporating V series ... Note: If both low and high pressure adjustment ranges are the 1st pattern,.
  • 8、Oct 1, 2017 — Hello gentlemen I am wondering if any of you have any thoughts on how to set the pressure on the regulators on a 4300c linkbelt I am getting ...20 posts  ·  Check the flow of the pilot pump. I have been told that machines of this era the pump wears, ...

What is the difference between vane pump and piston pump?

  • 1、Aug 17, 2015 — a. in radial piston pump, radial slots in vane pumps are replaced by radial bores which accommodate pistons · b. in radial piston pump, radial ...
  • 2、by M El Ashmawy · 2009 · Cited by 12 — design with no pressure difference between the two sides of the vane is proposed. Keywords: vane pump, friction, PVD, hydraulic, power steering, coating.
  • 3、The moving vanes, which are guided radially in a rotor and are supported in an eccentric stroke ring (stator), create an increasing geometric displacement ( ...
  • 4、While gear pumps are available in a wide range of displacement sizes and pressures, and they suit various machinery applications, piston pumps offer the ...
  • 5、Sep 20, 2013 — In a variable-displacement pump, the flow rate and outlet ... The most common type of variable-displacement pump is the rotary vane pump, ...
  • 6、A balanced vane type hydraulic pump has a thrust plate and a pressure plate which cooperate with a cam ring, rotor and vanes to provide a plurality of pump ...
  • 7、comparison between gear and sliding vane pumps that help spell out the differences between the two: While the sliding vane and internal/external gear pump ...
  • 8、Jul 10, 2009 — A gear pump carries fluid between the teeth of two meshing gears. One gear is driven by the drive shaft and turns an idler gear. Gear and vane ...

How does a vane vacuum pump work?

    Where are Rexroth pumps made?

    • 1、Bosch Rexroth AG is an engineering firm based in Lohr am Main in Germany. ... This article may have been created or edited in return for undisclosed payments ...
    • 2、KE-30 was a small receiver, built around a digital frequency synthesizer, ... pumps|Drive axles|Engines parts|Transmission parts IVECO KOMATSU REXROTH ...
    • 3、13 hours ago — The JCB Wheelloader 435S is made for maximum productivity in farming ... ZF-Transmission and -Axles and Rexroth-Pumps for best power to ...
    • 4、Our team is made up of the most distinguished experts and engineers with years of experience in this industry. We have been investing a minimum of 30% of our ...
    • 5、United States. Federal Trade Commission · 1984 · ‎CompetitionBorg - Warner's hydraulics division made no effort to serve the ... Bosch GmbH supplies hydraulic valves , gear pumps , and motors to Bosch U.S. ( CX 88 p .
    • 6、Looking for Rexroth hydraulic pump parts or Rexroth pump repair? ... to costly rebuild services or OEM parts that are no longer being manufactured.
    • 7、The range of Bosch Rexroth hydraulic pumps includes: Axial piston pumps | available in swash plate and bent axis design for medium and high pressure ...
    • 8、Feb 16, 2022 — At the company's Brantford facility, pneumatic actuators and valves are also manufactured under its Aventics and ASCO brands.

    What does Bosch Rexroth do?

      Can vane pump run dry?

      • 1、An oil-lubricated rotary vacuum pump can also run dry for short periods of time, which can reduce overall oil consumption and cost. Dry-running pumps in ...
      • 2、Oct 19, 2020 — Piston pumps can handle higher pressures than gear or vane pumps ... can generate a good vacuum and even run dry for short periods of time.
      • 3、The Cycloseal uses stationary deflector vanes cast into the pump backplate ... With the Run-Dry system your pump can run dry for hours without damaging the ...
      • 4、PSG offer a wide range of pump technologies & brands with: ... Vane. Pump. Ideal for thin liquids. Highly Efficient at low flow & on thick ... Can run dry ...
      • 5、Dec 12, 2018 — PD pumps can operate continuously at 0.2 centipoise (cP) or 200,000 ... sliding vane pumps—nonpulsing, self-priming and dry-run capability; ...
      • 6、This type of pump has better dry priming capability than other PD pumps. Vane pumps can run dry, but are subject to vane wear. Abrasive applications require the ...
      • 7、A positive displacement pump works by using a screw, a blade, a vane, a lobe, ... Certain Positive Displacement Pumps can run dry i.e Air Operated Diaphragm ...
      • 8、The next largest group of dry rotary vane pumps also offers all ... Dry running rotary vane pressure-vacuum pumps. V-VTA ... Can be fitted with a compressed.

      Where is vane pump used?

      • 1、Due to the fact that they can handle a wide range of viscosities, Vane pumps are often widely used for fuel loading terminals, fuel transport vehicles, solvents ...
      • 2、Oct 19, 2020 — Vane pumps can be either fixed or variable displacement, as discussed for piston pumps. Vane pumps are used in utility vehicles (such as those ...
      • 3、A rotary vane pump is a positive-displacement pump that consists of vanes mounted ... Vane pumps are commonly used as high-pressure hydraulic pumps and in ...
      • 4、Rotary vane pumps are common in industrial and lab settings, and are used to pump gas, oil, water and other, low-viscosity fluids.
      • 5、Jul 10, 2009 — Of those, gear and vane pumps are primarily used for fixed-flow applications. Today, the trend to variable-displacement pumps with higher ...
      • 6、by W Quanbin · 2017 — In the laboratory, the comprehensive experiment workbench was used to test the relationship between pumping pressure, flow rate and other ...
      • 7、Results 1 - 24 of 68 — Rotary Vane Pumps & Motors. A rotary vane pump is used to clean and transfer materials for industrial vacuum systems. Show filters.
      • 8、Vane pumps uses vanes (stators) and rotor setup instead of impellers to create pressure. Centrifugal pumps are most commonly used pumps and more efficient. 2.3K ...4 answers  ·  Top answer: A2A A rotary vane pump is a rotary positive-displacement pump that consists of vanes mounted ...

       

       

      Rexroth PVV4-1X/082RA15LMC Vane pump Video

       

      Bosch Rexroth Hydraulics R900930907, PVV4-1X

      Bosch Rexroth Hydraulics R900930907, PVV4-1X/098RA15UMC. Fixed displacement vane pump, 5.96 cu-in per revolution, 3045 psi maximum operating 

      Gear Pumps for sale - saar-hydraulic-com results of page 76

      China Rexroth Vane Pumps PVV4-1X/082RA15LMC for sale. Rexroth Fixed Displacement Vane Pumps PVV Series Nominal sizes 18 to 193 Series 1X 

      Rexroth - Power Parts Pro

      R900937328 PVV2-1X/040RA15LMB · R900968423 4WRDE 16 V000S-5X/6L15K9/WG152M-488 · R900937330 PVV4-1X/082RA15LMC · R900968424 LFA 

      Search - CMA/Flodyne/Hydradyne - complete machine automation

      Rexroth Hydraulic Vane Pump R987054443. Check Stock ... PVV21-1X/055-027RJ15RDMBSO43A-1507. Vendor ID: ..... PVV4-1X/082RA15LMC Vendor ID: 

      Rexroth Vane Pumps PVV4-1X/122RA15UMC - Saar Hydraulic

      Quality Vane Pumps manufacturers & exporter - buy Rexroth Vane Pumps PVV4-1X/122RA15UMC from China manufacturer

      PVV – Fixed displacement vane pumps | Bosch Rexroth USA

      R900926823, PVV2-1X/068RA15UMB, 3, 10, RE10335. R900936293, PVV4-1X/069RA15DMC, 3, 10, RE10335. R900931548, PVV4-1X/082RA15DMC, 5, 10 

      Hydraulic pump - Hydro-Funk GmbH

      Bosch Rexroth PVV4-1X/082RA15DVC Vane pump. Brand: Bosch Rexroth. Code: R900978703. Detail · Bosch Rexroth PVV4-1X/082RA15LMC Vane pump

      Bosch Rexroth AG - electrical components, instrumnets of industrial

      R900937330, Bosch Rexroth AG, PVV4-1X/082RA15LMC. R900933057, Bosch Rexroth AG, PVV4-1X/082RA15RMC. R901082163, Bosch Rexroth AG 

      pvv4-1x/082ra15umc - koupit levně u Mercateo

      pvv4-1x/082ra15umc: 27 Výrobky pro „pvv4-1x/082ra15umc“ u Mercateo, zásobovací ... Bosch Rexroth PVV4-1X/082RA15LMC Vane pump (1 nabídka)

      Bosch Rexroth Hydraulics R900929542, PVV4-1X

      Bosch Rexroth Hydraulics R900929542, PVV4-1X/122RA15DMC. Fixed displacement vane pump, 11.19 cu-in per revolution, 3045 psi maximum operating 
      All Products Contact Now