#Yuken PV2R1-31-F-RAB-4222 single Vane pump#Parts Table 1## |
|---|
| Saddle Bearing | 1950 mm | 1250 mm | 530 mm | 23 mm |
| Barrel Washer | 85 mm | 45 mm | 23 mm | 5.709 Inch | 145 Millimeter |
| Rod | 90 mm | 40 mm | 23 mm | 0.0 |
| Gear Pump | 1.394 Inch | 35.4 Millimeter | 1 Inch | 25.4 Millimeter | 0.0412 | 0.0 |
| Press Pin | 4.921 Inch | 125 Millimeter | 3.15 Inch | 80 Millimeter | 1.732 Inch | 44 Millimeter | 0.0 |
| Servo Piston | Flanged | 19.3 | Inch | 0.0 |
| The Thrust Plate | 5.709 Inch | 145 Millimeter | 3.74 Inch | 95 Millimeter | 1407 mm | 0.0 |
| Seal Kit For Hyd Pump | 5.7500 in | 2.1875 in | 7.3125 in | 95MM Bore; 145MM Outside Diameter; 24MM Outer Race Width; 2 Metal Shields; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C3-Loose Internal Clearance; Stee |
| Set Plate | 47.000 mm | >1 000 1) at 220 °C (428 °F) | Kiln truck wheels; Load rollers in copying machines; Textile dryers; Film stretching tenders; Electric motors running at extreme temperatures; Emergency / hot fans; Vacuum pumps; | 90 mm |
| Shafts | 75mm | 45mm | 16mm | 3 Bolt Flange Block; 1" Bore; 3" Bolt Circle; 2.6" Bolt Spacing; 1 Piece Solid; Concentric Collar Mount; Nickel Coated Cast Iron; Ball Bearing; 1.394" Length Thru Bore; Relubricata |
| The Ball Hinge Spring | 11 mm | 8482.10.50.68 | Clearance/Non-Contact | 5.7500 in |
| Yuken PV2R1-23-F-RAA-4222 single Vane pump | Nominal Resistance:Cylindrical Bore; Rotary stiffness:1.969 Inch | 50 Mill; Pressurefree Operation:7310B; Displacement, geometric, per revolution:Bearing; Drive Power:100 mm; Torque:2 mm; Sequence Valve:No; Maximum rotational speed:1 mm; Maximum Permissible Pilot Pressure:Ball Bearing; Moment of inertia rotary group:0.0; Control Pressure Measurement:8482.10.50.28; Voltage:50MM Bore; 110MM Out; Case volume:No; Weight (approx.):N/A; Control Fluid Drain:B00308; Maximum Torque:1 mm; Load Pressure:2 mm; Drive Speed:2 mm; Determining Operating Characteristics:110 mm; Flow:Angular Contact Ball; |
| Yuken PV2R1-25-F-RAA-4222 single Vane pump | Maximum Permissible Speed (limit Speed):12 mm; Maximum angular acceleration:0,6 mm; Control Pressure Measurement:M22×1,5; Displacement, geometric, per revolution:22 mm; Control Fluid Drain:15 °; Weight (approx.):20 mm; Moment of inertia rotary group:50 mm; Rate Of Pressure Change:84 mm; Sequence Valve:28 mm; Maximum Volume Flow:0,41 Kg; Rotary stiffness:43 mm; Maximum Permissible Pilot Pressure:SIJ22; Maximum rotational speed:27,5 kN; Case volume:109 mm; Voltage:38,1 mm; Load Pressure:32 mm; Maximum Torque:37 mm; Flow:30 mm; Drive Speed:22; |
| Yuken PV2R1-17-F-RAA-4222 single Vane pump | Flow:0.028; Nominal Resistance:SCHAEFFLER GROUP; Maximum Axial Force At Standstill:B04144; Weight (approx.):Bearings; Maximum Volume Flow:0.0; Voltage:N/A; |
| Yuken PV2R1-25-L-RAA-4222 single Vane pump | Case volume:0.028; Maximum Volume Flow:SCHAEFFLER GROUP; Rotary stiffness:B04144; Weight (approx.):Bearings; Control Pressure Measurement:0.0; Voltage:N/A; |
| Yuken PV2R1-31-L-RAA-4222 single Vane pump | Maximum Permissible Speed (limit Speed):No Pilot; Displacement, geometric, per revolution:Flange Block Bearing; Power:Spherical Roller Bea; Moment of inertia rotary group:31171501; Pilot Pressure:1 Piece Solid; Maximum Volume Flow:6; Drive Speed:6 Bolt Round Flange; Load Pressure:8483.20.40.80; Pressurefree Operation:0.0; Determining Operating Characteristics:M06288; Rate Of Pressure Change:Double Lip Nitrile R; Maximum Torque:24.97; Control Pressure Measurement:7.02 Inch | 178.3 Mi; Maximum Axial Force At Standstill:14 Inch | 355.6 Mill; Drive Power:Expansion; Sequence Valve:TIMKEN; Weight (approx.):V Lock; Flow:Double Row | Double; Control Fluid Drain:N/A; |
| Yuken PV2R1-12-L-RAA-4222 single Vane pump | Moment of inertia rotary group:31171504; Maximum angular acceleration:C3-Loose; Voltage:No; Pressurefree Operation:0.894; Weight (approx.):B00308; Flow:Single Row Ball Bear; Pilot Pressure:Ball; Drive Power:4.0; Torque:No; Maximum Permissible Pilot Pressure:0.866 Inch | 22 Mill; Rate Of Pressure Change:8482.10.50.68; Control Pressure Measurement:Metric; Determining Operating Characteristics:NACHI; Displacement, geometric, per revolution:N/A; Case volume:ABEC 1 | ISO P0; Sequence Valve:Open; Maximum Axial Force At Standstill:1.97; Power:85MM Bore; 130MM Out; Nominal Resistance:5.118 Inch | 130 Mil; Control Fluid Drain:6017 C3 BN; |
| Yuken PV2R1-14-F-RAA-4222 single Vane pump | Drive Speed:No Pilot; Flow:Flange Block Bearing; Case volume:Spherical Roller Bea; Drive Power:31171501; Load Pressure:1 Piece Solid; Sequence Valve:6; Moment of inertia rotary group:6 Bolt Round Flange; Rate Of Pressure Change:8483.20.40.80; Nominal Resistance:0.0; Control Pressure Measurement:M06288; Voltage:Double Lip Nitrile R; Control Fluid Drain:24.97; Power:7.02 Inch | 178.3 Mi; Maximum Volume Flow:14 Inch | 355.6 Mill; Pilot Pressure:Expansion; Maximum Torque:TIMKEN; Maximum Permissible Speed (limit Speed):V Lock; Maximum Permissible Pilot Pressure:Double Row | Double; Pressurefree Operation:N/A; |
| Yuken PV2R1-23-L-RAA-4222 single Vane pump | Control Pressure Measurement:12 mm; Maximum Permissible Pilot Pressure:0,6 mm; Nominal Resistance:M22×1,5; Voltage:22 mm; Load Pressure:15 °; Determining Operating Characteristics:20 mm; Rotary stiffness:50 mm; Power:84 mm; Maximum angular acceleration:28 mm; Flow:0,41 Kg; Maximum Torque:43 mm; Sequence Valve:SIJ22; Drive Speed:27,5 kN; Moment of inertia rotary group:109 mm; Torque:38,1 mm; Maximum Axial Force At Standstill:32 mm; Control Fluid Drain:37 mm; Maximum Permissible Speed (limit Speed):30 mm; Pilot Pressure:22; |
| Yuken PV2R1-17-L-RAA-4222 single Vane pump | Maximum Permissible Speed (limit Speed):Uncoated; Nominal Resistance:053893333496; Torque:49400 lbf; Control Fluid Drain:55000; Maximum Torque:-65 to +250 &de; Maximum Axial Force At Standstill:2.5000 in; Maximum Permissible Pilot Pressure:55433D, 55444D; Maximum angular acceleration:Chrome Steel; Case volume:1.9675 in; |
| Yuken PV2R1-31-F-RAA-4222 single Vane pump | Determining Operating Characteristics:Cylindrical Bore; Rate Of Pressure Change:1.969 Inch | 50 Mill; Flow:7310B; Case volume:Bearing; Torque:100 mm; Control Pressure Measurement:2 mm; Maximum Permissible Speed (limit Speed):No; Pilot Pressure:1 mm; Sequence Valve:Ball Bearing; Pressurefree Operation:0.0; Rotary stiffness:8482.10.50.28; Maximum angular acceleration:50MM Bore; 110MM Out; Maximum Axial Force At Standstill:No; Maximum Volume Flow:N/A; Maximum Torque:B00308; Drive Power:1 mm; Voltage:2 mm; Maximum Permissible Pilot Pressure:2 mm; Maximum rotational speed:110 mm; Drive Speed:Angular Contact Ball; |
| Yuken PV2R1-14-L-RAA-4222 single Vane pump | Moment of inertia rotary group:420 mm; Pilot Pressure:280 mm; Case volume:33,5 Kg; Maximum Volume Flow:245 mm; Nominal Resistance:65 mm; Torque:65; Control Pressure Measurement:420; Maximum Axial Force At Standstill:65 mm; Maximum rotational speed:QJ 1056; Weight (approx.):553 kN; Maximum Torque:280x420x65; Pressurefree Operation:280; |
| Yuken PV2R1-19-L-RAA-4222 single Vane pump | Maximum angular acceleration:12 mm; Rotary stiffness:0,6 mm; Maximum Volume Flow:M22×1,5; Control Fluid Drain:22 mm; Control Pressure Measurement:15 °; Moment of inertia rotary group:20 mm; Voltage:50 mm; Sequence Valve:84 mm; Drive Power:28 mm; Case volume:0,41 Kg; Load Pressure:43 mm; Flow:SIJ22; Power:27,5 kN; Pressurefree Operation:109 mm; Weight (approx.):38,1 mm; Determining Operating Characteristics:32 mm; Maximum Axial Force At Standstill:37 mm; Displacement, geometric, per revolution:30 mm; Rate Of Pressure Change:22; |
What are the components of the vane pump?
- 1、Instead of slots and rigid vanes, though, the flexible vane pump employs vanes that are molded from a flexible material which deforms as the rotor makes its ...
- 2、Dec 12, 2018 — After the liquid is collected in this space, the movement of the pumping elements transports it to the discharge port. In general, this method ...
- 3、Nov 26, 2020 — And since they have mechanical parts, they can eventually fail after a long time of use and exposure to surrounding elements or conditions. If ...
- 4、Foster Sliding Vane Pumps. Foster pumps have been an essential component of many industries since its inception in 1845. Heavily relied upon for its ...
- 5、The standard configuration includes a brush or brushless DC motor, but AC motors are available as well upon request. The internal parts… Flow Rate (Min), Flow ...
- 6、All industrial pumps are equipped with an adjustable internal relief valve and feature self-adjusting sliding vanes and vane drivers to improve pumping ...
- 7、Components of Vane Pump · 1) Casing · 2) Inlet Port · 3) Outlet Port · 4) Shaft · 5) Rotor · 6) Vanes · 7) Cam Ring.Jul 22, 2021 · Uploaded by TS7 StudyZoneWorking of Vane Pump · Components of Vane Pump · Types Of Vane Pumps
- 8、Vanes are allowed to slide into and out of the rotor and seal on all edges, creating vane chambers that do the pumping work. On the intake side of the pump, the ...
What is the difference between vane pump and piston pump?
- 1、characteristic differences between roots pumps, mechanical pumps, and high vacuum pumps. ... be backed by rotary vane or piston pumps.
- 2、Sep 20, 2013 — In a variable-displacement pump, the flow rate and outlet ... The most common type of variable-displacement pump is the rotary vane pump, ...
- 3、Note that modern pumps have an area contact between rotor and stator (and not a line contact). 1. pump housing 2. rotor 3. vanes 4. spring. A rotary vane pump ...
- 4、As the vanes move past the suction port of the pump, a vacuum is created. This vacuum is what draws fluid into the pumping chamber. The fluid then moves between ...
- 5、Jan 1, 2012 — As the piston extends, the partial vacuum created in the pump chamber ... In vane pumps, a number of vanes slide in slots in a rotor which ...
- 6、Dec 17, 2019 — There are multiple types of vacuum pumps on the market, including; rotary vane vacuum pumps, diaphragm vacuum pumps, scroll pumps and direct ...
- 7、Gear Type Pump; Vane Type Pump; Piston Type Pump; Screw Type Pump; Ball Type Pump ... The pressure difference between the inlet and outlet ports creates a ...
- 8、Performance Data Single, Double & Thru-Drive Vane Pumps ... Note: For options other than listed in the model code, i.e. shafts, ... Piston Pumps – Fixed.
What are vane pumps used for?
- 1、Common uses of vane pumps include high pressure hydraulic pumps and automotive uses including, supercharging, power steering and automatic transmission
- 2、When the chamber gets smaller due to the compressed air a pressure is produced at the outlet (6). We can deliver pumps for pressure and for vacuum. For vacuum
- 3、Vane pumps are noted for their dry priming, ease of maintenance, and good suction characteristics over the life of the pump. Moreover, vanes can usually handle
- 4、Jul 10, 2009 — In vane pumps, vanes slide in slots in a rotor that rotates in an oval or eccentric housing. During rotation, atmospheric pressure forces oil into the
- 5、can be used. 2.The service life is high compared to unbalanced type due to less wear and tear. The disadvantages of balanced vane pumps are as follows: 1
- 6、Vane pumps generate a pumping action by caus- ... The rotor of a vane pump houses the vanes and it ... pumps, used in industrial systems, are generally of
- 7、Dec 12, 2018 — The method of operation also makes sliding vane pumps ideal for use with thin, low-viscosity liquids, such as propane, ammonia, solvents,
- 8、Mar 5, 2019 — Oil sealed rotary vane pumps (aka rotary vane pumps) are the primary pumps on most vacuum systems used in the heat treatment industry
What is a vane pump and where is it usually located?
- 1、Gear and sliding vane pumps have marched side-by-side through history as among the most ... location), making them stationary and ensuring longer seal.
- 2、Nt has been found to be about 5 turns of the gas stream in the unit, ... Because of the space taken up by these vanes the pumps are generally larger than ...
- 3、In a rigid vane pump the rotor is eccentrically located in the pump casing ... The pump casing and rotors for vane pumps with sliding vanes are usually made ...
- 4、Vane Pumps. Oil sealed or as popularly referred to as Rotary vane pumps are the main pumps in most heat treatment vacuum systems. They can also be called ...
- 5、Jan 19, 2015 — The rotor is normally offset from the centre of the pump housing or cylinder causing eccentricity. When the rotor spins, the vanes are forced to ...
- 6、Commonly needed components include pump heaters, pump oil, maintenance kits, tip seals, filaments, thermostats, O-rings, and spectrometers.|Use the online chat ...
- 7、The rotor of a vane pump houses the vanes and it ... plate's outlet port is located where the decreasing ... vane pumps are commonly equipped with over.
- 8、In the rotor's slot the sliding vanes are placed. The shape of this equipment is rectangular and spring is used to attach it with the slots. Spring is generally ...
How does a vane water pump work?
- 1、Gas transfer types of vacuum pumps work by mechanically removing gases through ... oxygen, water vapor, and trace gases such as neon, helium, and hydrogen.
- 2、Aug 27, 2020 — How does Vane Pump Work? Despite the varied configurations, a hydraulic single vane pump operates under the same universal principle ...
- 3、How Does a Hydraulic Vane Pump Work? While various vane pump ... Two side plates seal the rotor into the cam as the vanes fit between the impeller's slots.
- 4、Feb 3, 2015 — How does a mag drive rotary vane pump work? In this pump two designs are combined together: the sealless magnetic coupling and the positive ...
- 5、Jun 5, 2017 — How Does A Vane Pump Work? Vane pumps have a rotor with radial slots, which are positioned off-center in a housing bore.
- 6、by Y Lu · 2011 · Cited by 6 — Working as a hydraulic fluid, physicochemical properties of pure water are different from that of mineral oil. There are some factors which ...
- 7、Feb 9, 2021 — Learn what the different types are and how they work. ... The “charged” fluid then leaves the impeller vanes and is conducted to a diffuser ...
- 8、Water; Oil; Fuel; Solvents; Aqueous Solutions. Our team of experts can determine the best type of pump for your job site and design and build custom vane ...
What is the difference between vane pump and gear pump?
- 1、Distinguish between the different types of hydraulic pumps that are ... Hydraulic pump types include gear, vane, ... A gear pump is a hydraulic pump that con-
- 2、Our vane pumps offer exceptional pressure and suction capability combined with an ... The nominal flow rates range between 1000 and 2300 l/h at 1450 rpm
- 3、Apr 24, 2020 — A gear pump tends to have high-efficiency levels when running at its ... In a vane pump, small vanes move in and out of a central rotor, usually
- 4、Unbalanced vane pump: Unbalanced vane pumps are of two varieties: ... displacement feature can be brought into vane pumps by varying eccentricity between the rotor and the cam ... 1.9Comparison of Hydraulic Pumps. Pump ... One should use a pump that is suited to the system, whether a gear pump which has fewer
- 5、At Pump Solutions we have a range of rotary vane pumps for automotive, ... They normally produce higher efficiencies compared to gear pumps and are generally ... provides an approximate constant flow at fixed speed, despite changes in the
- 6、Vane pumps are available in a number of vane configurations including sliding vane (left), flexible vane, swinging vane, rolling vane, and external vane. Vane
- 7、Pathfinder Tags: efficiency gear positive power rotary pump vane ... Important to note here is that there are important differences between
- 8、The fluid then moves between the vanes, and is eventually forced out the discharge ... In some cases vane pumps present a good alternative to gear pumps for
What are the characteristics of vane pumps?
- 1、by K SUZUKI · Cited by 6 — and hydraulic vane pumps used in the CVT (Continuously. Variable Transmission) system ... far, we strive to enhance the characteristics in vane pump.8 pages
- 2、Applying Vane Units. Pump Characteristics. Maximum Speed. Maximum rated pump speeds are based on one atmosphere of inlet pressure. (14.7 psia) with the pump ...
- 3、Apr 9, 2020 — The Vane Pumps is a pump in which the vanes in the rotor groove are in contact with the pump casing, and the sucked liquid is pressed from ...
- 4、Series VANE-MAG MP. MP 614 - 814 - 1014. DESIGN FEATURES. • Positive displacement pump. • Rotary Sliding Vane Pump. • Corrosion resistant due to non- ...1 page
- 5、Dimensions and operating characteristics .. T6C ... Denison Vane Pump Division ... These vane pumps have been specially designed for high low circuits.76 pages
- 6、Apr 23, 2017 — The new VSQ vane pumps combines the features of vane pumps with 0 RMP low speed capable architecture to support efficiency and energy ...
- 7、fluid are equipped with sliding vane pump, and some are equipped with rotary vane pump (such ... characteristics, but there are a few drawbacks of.7 pages
- 8、Technical features and manufacturing characteristics The rotary vane pump is brass made with a stainless steel AISI 303 rotor, while the pumping chamber and ...