#Yuken PV2R2-41-F-RAA-41 single Vane pump#Parts Table 1## |
|---|
| Saddle Bearing | 65 mm | 5,55 Kg | 160 mm | 2.38 |
| Cylinder | 75 mm | 0,4 Kg | 100 mm | 76,5 kN |
| Oil Distribution Plate | 6,35 mm | 0,018 Kg | 0.039 | 20.81 |
| Bearing Plate | 2.165 Inch | 55 Millimeter | 16 lb | 3/4 Inch | N/A |
| Regulator | 1.5 Inch | 38.1 Millimeter | 0.726 | 3.15 Inch | 80 Millimeter | N/A |
| Swash Plate Assy | 2.938 Inch | 74.625 Millimeter | 9.448 | 3.594 Inch | 91.288 Millimeter | N/A |
| Friction Plate | 0.669 Inch | 17 Millimeter | 0.039 | 1.378 Inch | 35 Millimeter | N/A |
| Coil Spring | 0.197 Inch | 5 Millimeter | 0.005 | 0.63 Inch | 16 Millimeter | N/A |
| Shafts | Bearing | 45 | Inch | N/A |
| Ball Guides | 19 | 1.6 | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur | N/A |
| Spacer | 35 mm | 4284 r/min | 79,375 mm | 48200 lb |
| Yuken PV2R1-31-L-RAA-4222 single Vane pump | Displacement, geometric, per revolution:N/A; Load Pressure:SKF; Power:0.0; Maximum rotational speed:713649300; Case volume:Bearings; Maximum angular acceleration:B00234; Maximum Permissible Speed (limit Speed):0.661; Control Fluid Drain:VKBA 1460; Flow:CX118; Moment of inertia rotary group:5024; |
| Yuken PV2R1-12-L-RAA-4222 single Vane pump | Displacement, geometric, per revolution:Cylindrical Bore; Control Pressure Measurement:1.969 Inch | 50 Mill; Weight (approx.):7310B; Determining Operating Characteristics:Bearing; Drive Speed:100 mm; Maximum Permissible Speed (limit Speed):2 mm; Power:No; Control Fluid Drain:1 mm; Maximum angular acceleration:Ball Bearing; Maximum Permissible Pilot Pressure:0.0; Sequence Valve:8482.10.50.28; Voltage:50MM Bore; 110MM Out; Case volume:No; Rate Of Pressure Change:N/A; Maximum Torque:B00308; Drive Power:1 mm; Moment of inertia rotary group:2 mm; Maximum rotational speed:2 mm; Nominal Resistance:110 mm; Maximum Volume Flow:Angular Contact Ball; |
| Yuken PV2R1-25-F-RAA-4222 single Vane pump | Power:Oilite®, Synthet; Pressurefree Operation:SAE 841, CT-1000-K26; Rate Of Pressure Change:0.688 lb; Maximum Axial Force At Standstill:Static 8000 / D; Pilot Pressure:50000; Maximum angular acceleration:-35 °F to +; Displacement, geometric, per revolution:Click here; Maximum rotational speed:2-3/4"; Flow:2; Torque:1200 (sfm); Control Fluid Drain:1/4 in; Weight (approx.):3-7/8 in; Maximum Torque:Oil-Impregnated Bron; Control Pressure Measurement:Click here; |
| Yuken PV2R1-25-L-RAA-4222 single Vane pump | Maximum angular acceleration:250,000 mm; Torque:46,000 mm; Displacement, geometric, per revolution:250x349.500x46; Rate Of Pressure Change:46,000 mm; Power:349,500; Control Fluid Drain:349,500 mm; Determining Operating Characteristics:250,000; Load Pressure:SC5003; Weight (approx.):46,000; |
| Yuken PV2R1-23-L-RAA-4222 single Vane pump | Pressurefree Operation:420 mm; Maximum Torque:280 mm; Power:33,5 Kg; Voltage:245 mm; Flow:65 mm; Maximum Permissible Pilot Pressure:65; Drive Power:420; Weight (approx.):65 mm; Load Pressure:QJ 1056; Moment of inertia rotary group:553 kN; Pilot Pressure:280x420x65; Control Pressure Measurement:280; |
| Yuken PV2R1-19-L-RAA-4222 single Vane pump | Voltage:250,000 mm; Load Pressure:46,000 mm; Maximum Volume Flow:250x349.500x46; Rate Of Pressure Change:46,000 mm; Maximum rotational speed:349,500; Sequence Valve:349,500 mm; Torque:250,000; Flow:SC5003; Case volume:46,000; |
| Yuken PV2R1-17-F-RAA-4222 single Vane pump | Power:12 mm; Pilot Pressure:0,6 mm; Maximum Permissible Speed (limit Speed):M22×1,5; Weight (approx.):22 mm; Control Fluid Drain:15 °; Maximum Torque:20 mm; Voltage:50 mm; Determining Operating Characteristics:84 mm; Maximum Volume Flow:28 mm; Maximum angular acceleration:0,41 Kg; Rate Of Pressure Change:43 mm; Load Pressure:SIJ22; Case volume:27,5 kN; Maximum rotational speed:109 mm; Nominal Resistance:38,1 mm; Pressurefree Operation:32 mm; Control Pressure Measurement:37 mm; Moment of inertia rotary group:30 mm; Maximum Axial Force At Standstill:22; |
| Yuken PV2R1-17-L-RAA-4222 single Vane pump | Rotary stiffness:4.375 Inch | 111.125; Drive Power:Tapered; Flow:31171516; Torque:TIMKEN; Voltage:Double Row; Load Pressure:B04336; Weight (approx.):0.005; Maximum Volume Flow:H924045; Rate Of Pressure Change:0 Inch | 0 Millimete; Maximum angular acceleration:4.563 Inch | 115.9 M; Drive Speed:Assembly; Maximum rotational speed:Tapered Roller Beari; Pressurefree Operation:17.61; Case volume:Inch; Control Fluid Drain:8482.20.00.00; Pilot Pressure:Bearing; Maximum Permissible Pilot Pressure:8.438 Inch | 214.325; Maximum Torque:Tapered Roller Beari; Nominal Resistance:2 Single Cone | 1 Do; |
| Yuken PV2R1-14-L-RAA-4222 single Vane pump | Maximum Axial Force At Standstill:31171504; Moment of inertia rotary group:C3-Loose; Pilot Pressure:No; Torque:0.894; Control Pressure Measurement:B00308; Determining Operating Characteristics:Single Row Ball Bear; Voltage:Ball; Maximum Torque:4.0; Control Fluid Drain:No; Maximum Permissible Speed (limit Speed):0.866 Inch | 22 Mill; Load Pressure:8482.10.50.68; Rate Of Pressure Change:Metric; Nominal Resistance:NACHI; Sequence Valve:N/A; Maximum Volume Flow:ABEC 1 | ISO P0; Maximum Permissible Pilot Pressure:Open; Drive Power:1.97; Maximum rotational speed:85MM Bore; 130MM Out; Case volume:5.118 Inch | 130 Mil; Flow:6017 C3 BN; |
| Yuken PV2R1-14-F-RAA-4222 single Vane pump | Control Pressure Measurement:31171504; Flow:C3-Loose; Torque:No; Load Pressure:0.894; Voltage:B00308; Control Fluid Drain:Single Row Ball Bear; Sequence Valve:Ball; Pilot Pressure:4.0; Maximum Axial Force At Standstill:No; Case volume:0.866 Inch | 22 Mill; Moment of inertia rotary group:8482.10.50.68; Rotary stiffness:Metric; Maximum Permissible Speed (limit Speed):NACHI; Maximum Volume Flow:N/A; Maximum angular acceleration:ABEC 1 | ISO P0; Pressurefree Operation:Open; Maximum rotational speed:1.97; Drive Power:85MM Bore; 130MM Out; Maximum Torque:5.118 Inch | 130 Mil; Displacement, geometric, per revolution:6017 C3 BN; |
| Yuken PV2R1-23-F-RAA-4222 single Vane pump | Drive Power:No Pilot; Weight (approx.):Flange Block Bearing; Maximum Volume Flow:Spherical Roller Bea; Rotary stiffness:31171501; Moment of inertia rotary group:1 Piece Solid; Sequence Valve:6; Rate Of Pressure Change:6 Bolt Round Flange; Maximum Axial Force At Standstill:8483.20.40.80; Torque:0.0; Flow:M06288; Maximum Torque:Double Lip Nitrile R; Displacement, geometric, per revolution:24.97; Load Pressure:7.02 Inch | 178.3 Mi; Maximum Permissible Speed (limit Speed):14 Inch | 355.6 Mill; Pilot Pressure:Expansion; Power:TIMKEN; Control Pressure Measurement:V Lock; Determining Operating Characteristics:Double Row | Double; Maximum Permissible Pilot Pressure:N/A; |
| Yuken PV2R1-31-F-RAA-4222 single Vane pump | Voltage:12 mm; Control Pressure Measurement:0,6 mm; Maximum angular acceleration:M22×1,5; Weight (approx.):22 mm; Pilot Pressure:15 °; Sequence Valve:20 mm; Maximum Permissible Pilot Pressure:50 mm; Flow:84 mm; Drive Power:28 mm; Maximum Volume Flow:0,41 Kg; Moment of inertia rotary group:43 mm; Case volume:SIJ22; Torque:27,5 kN; Maximum Permissible Speed (limit Speed):109 mm; Rate Of Pressure Change:38,1 mm; Load Pressure:32 mm; Pressurefree Operation:37 mm; Maximum rotational speed:30 mm; Control Fluid Drain:22; |
What is a vane pump and where is it usually located?
- 1、fluid are equipped with sliding vane pump, and ... number of radial slots in which are located ... Generally, the advantages of dry pumps (usually.7 pages
- 2、There are several variations of vane pumps commonly available, ... If the rotor was placed directly in the centre of the cam ring, the pump would have no ...
- 3、Sep 23, 2019 — Rotary vane pumps usually perform better than diaphragm pumps in that you ... Another example of built-in vacuum control can be found in the ...
- 4、Piston – These are usually multiple rotor pumps but can be single. ... These components may be located in the rotor or in the stator. Vane rotary pumps can ...
- 5、by K SUZUKI · Cited by 6 — The 12 vanes and a rotor are located between two valve plates with some notches. 2.2 Experiment circuit. As shown in Fig. 2, the hydraulic circuit used in the.
- 6、Vacuum pumps are always sucking contamination towards them. ... In some cases, such as when a vacuum pump is used to bag down wood based fibre boards for ...
- 7、The blades on the vane pump, which are always in contact with the cam wall, turn with the rotor. As the rotor spins, the vanes slide out when they reach the ...
- 8、The PVD pumps are variable displacement vane pumps with mechanical pressure ... The pumps are usually placed directly upon the oil tank. Flooded.10 pages
What is the difference between vane pump and piston pump?
- 1、by M El Ashmawy · 2009 · Cited by 12 — ... the friction forces between a vane tip and cam-ring in oil vane pumps. ... normal vane force, pressure difference between the two sides of the vane, ...
- 2、Piston pump; Diaphragm pump; Screw pump; Gear pump; Vane pump; Peristaltic hose. Global Pumps supply a huge range of industrial pumps, stocked locally ...
- 3、Describe the sequences of a positive displacement pump. Differentiate between fixed and variable displacement pumps. Classify and describe the three types ...
- 4、Objectives · Differentiate between fixed and variable displacement · Compare the different designs of gear, vane and piston pumps ...
- 5、The vanes create segmented chambers within the pump head, partitioning the pump head between the rotor and outer casing which enable the vane pump to be self- ...
- 6、Vane pumps fall about midway between economical gear pumps and expensive piston pumps. Finally, while rotary, positive-displacement pumps are capable of pumping ...
- 7、Aug 22, 2021 — Describe the sequences of a positive displacement pump. Differentiate between fixed and variable displacement pumps.
- 8、Gear Type Pump; Vane Type Pump; Piston Type Pump; Screw Type Pump; Ball Type Pump ... The pressure difference between the inlet and outlet ports creates a ...
What is the difference between vane pump and gear pump?
- 1、Jan 17, 2019 — A comparison between a CFD simulation with PumpLinx and a 0D ... for a vane pump, the results obtained by the analysis of the gears' profiles
- 2、... plunger, and diaphragm types; rotary pumps include gear, lobe, screw, vane, and ... As in the case of piston pumps, fluid enters and leaves the pump through
- 3、Vane pump. Vane pumps operate according to the Positive displacement principle. The moving vanes, which are guided radially in a rotor and are supported in
- 4、The fluid then moves between the vanes, and is eventually forced out the discharge ... In some cases vane pumps present a good alternative to gear pumps for
- 5、Jun 27, 2013 — What's the difference between gear pumps, peristaltic pumps, and flexible ... Rotary Vane—Operate like the flexible impeller pumps but use an
- 6、Dec 23, 2015 — The circular arc gear pump has the advantages of special structure, low noise and long service life, and each has its own advantages. Vane
- 7、can successfully participate in the ... motor in the central supply, to- ... Figure 4: Overall efficiency of the T7B vane pump and internal gear pump of 32 ccm and 50 ccm ... Table 1: Comparison of rotation speeds in pressure-holding operation
- 8、popular. These are vane, gear, and piston pumps. ... The rotor of a vane pump houses the vanes and it ... is determined by the difference between the maxi-
What are the characteristics of vane pumps?
- 1、Apr 23, 2021 — When the pump driver turns the rotor, centrifugal force, ... these positive displacement pumps offer the best-combined characteristics of ...
- 2、by Y Nakamura · 2016 — Since the gases contained in hydraulic oil influence the characteristics of vane pumps, the two-phase flow model with cavitation is assumed ...
- 3、Because of its composition, therefore, shale oil has different handling characteristics than traditional crude oil as it makes its way through the refining ...4 pages
- 4、Vane pumps are used for liquid transfer applications from chemicals to liquefied ... Features: Ratios are fully interchangeable in each gearbox Multiple ...
- 5、02 Objective: To investigate the characteristics of vane pump. Apparatus: Multi pump test Bench Figure: Apparatus Diagram Vane Pump:- Vane pumps can handle ...
- 6、Aug 27, 2020 — The rigid seal among the vanes, rotor, cam, and side plate is the main thing to the useful suction traits common to the vane pumping ...
- 7、The simplest vane pump has a circular rotor rotating inside a larger circular cavity. The centers of these two circles are offset, causing eccentricity. Vanes ...
- 8、This article describes the friction characteristics at a vane tip, which causes primary loss of torque in a balanced vane pump, through the measurement of ...
How does a vane water pump work?
- 1、Results 1 - 6 of 6 — Sample Contents: Water only; Pump Type: Rotary Vane Vacuum Pump; Region: U.S. and Canada; Works With These Products: FreeZone 1 Liter ...
- 2、The vanes of the rotating impeller impart a radial and rotary motion to the liquid, ... A pump containing seven impellers within a single casing would be ...
- 3、Oct 19, 2016 — These vanes rotate when submersed in water which with it rotates the liquid. By doing this it builds up a centrifugal force to the water ...
- 4、Jun 29, 2018 — This is similar to how gear pumps work, but there is one set of vanes – versus a pair of gears – on a rotating cartridge in the pump housing. As ...
- 5、How a rotary vane pumps works ... Rotary vane pumps are a type of positive displacement pump. Like all positive displacement pumps, the flow rate is always ...
- 6、May 2, 2021 — How do sliding vane pumps work? ... a pump pull water? How far will a 1/2 HP well pump push water? What is the pressure of 1 hp water pump?
- 7、Highest flow rates of all pump types. Handles clean or dirty liquids, and liquids with low viscosity. Liquid should not contain air or vapors. Water and ...
- 8、The standard lubricated rotary vane pump is a single-stage pump with an integral, closed-loop oil-circulation system. The construction is heavy-duty and compact ...
What are the components of the vane pump?
- 1、Components of Vane Pump · 1) Casing · 2) Inlet Port · 3) Outlet Port · 4) Shaft · 5) Rotor · 6) Vanes · 7) Cam Ring.Jul 22, 2021 · Uploaded by TS7 StudyZoneWorking of Vane Pump · Components of Vane Pump · Types Of Vane Pumps
- 2、Vane Pump Overview. While vane pumps can handle moderate viscosity liquids, ... Shaft Seal - Component mechanical seals, industry-standard cartridge.
- 3、Jan 1, 2012 — That is, the amount of liquid that slips past the pumping element in a ... In one vane pump, light springs hold the vanes against the ...
- 4、The combination of a chemical duty diaphragm pump with a rotary vane pump was developed with strong ... The RVP-Trolley includes the following components:
- 5、Oil-less rotary vane vacuum pumps are suitable for higher pressure differences in vacuum applications. Self-lubricating, carbon-graphite composite vanes contact ...
- 6、Find the pumps and components needed for your application at BaileyHydraulics.com. We offer a vast selection of clutch pumps, dump, gear, piston, pto, ...
- 7、Parts we typically stock for vane pumps are: cartridge kits, bearings, housings & casings, seal kits, vanes, rotors, shafts and more. Contact us for pricing & ...Hydraulic Replacement Parts Cut Sheet: Dow...
- 8、Apr 2, 2020 — Whether it is your first time designing a vane pump or the tenth time, ... most common pump element design materials, component dimensions, ...
What are vane pumps used for?
- 1、Sliding-vane pumps are regularly used in refineries, terminals, etc. for pumping oils, solvents, paints, and coatings, etc. Rotary-vane technology is applied to hand-
- 2、What are vane pumps used for? Posted by IndiaMART User. Reply to this question 1 Reply
- 3、Jan 6, 2018 — The rotary vane pumps have wound their way into the educational field by becoming indispensable for vacuum experiments in physics. Here, oil
- 4、Sliding vane pumps are used in a wide range of applications within the LPG, refined fuels and chemical industry. The sliding vane design combines low cost
- 5、Vane pumps are usually used as high-pressure hydraulic pumps for cars which allow for braking, supercharging, air-con and auto-transmission. Though there
- 6、The internal vane pump vanes are thrown out by centrifugal force against the ... Vane pumps are used in large volumes on oil burners, and hydraulic drives
- 7、When the chamber gets smaller due to the compressed air a pressure is produced at the outlet (6). We can deliver pumps for pressure and for vacuum. For vacuum
- 8、Oct 20, 2017 — It would take a book to list every application rotary vane pumps are used for (in fact, there is a book). They are very popular in automotive and