#Yuken PV2R1-17-F-RAA-40 single Vane pump#Parts Table 1## |
|---|
| Spindle | 80 mm | 35 mm | 41000 | 21 mm |
| Block Cylinder | 170 mm | 85 mm | 8,94 Kg | 103 mm |
| Shoe Plates | 20.8 kN | 42.86 mm | 2.32 kg | 41.2 mm |
| Coil Spring | 2.875 Inch | 73.025 Millimeter | 1.438 Inch | 36.525 Millimeter | 1.317 | 97 |
| Ball Joint | 4.74 Inch | 120.396 Millimeter | 2.75 Inch | 69.85 Millimeter | 10.442 | 3.25 Inch | 82.55 Millimeter |
| Piston Sets | 1.72 Inch | 43.7 Millimeter | 1.5 Inch | 38.1 Millimeter | 0.199 | Four-Bolt Plummer Block |
| Swash Plate Assy | 2.677 Inch | 68 Millimeter | 1.575 Inch | 40 Millimeter | - | 0.591 Inch | 15 Millimeter |
| Regulator | 8482.10.50.28 | 1.575 Inch | 40 Millimeter | 547 lb | 9.0 in |
| Inclined Plate | 80 mm | 50 mm | 41000 | 19 mm |
| The Thrust Plate | 22 mm | 10 mm | 20000 r/min | 6 mm |
| Yuken PV2R1-14-F-RAA-4222 single Vane pump | Weight (approx.):12 mm; Control Pressure Measurement:0,6 mm; Maximum Permissible Speed (limit Speed):M22×1,5; Voltage:22 mm; Determining Operating Characteristics:15 °; Control Fluid Drain:20 mm; Maximum Torque:50 mm; Rotary stiffness:84 mm; Nominal Resistance:28 mm; Displacement, geometric, per revolution:0,41 Kg; Sequence Valve:43 mm; Maximum Axial Force At Standstill:SIJ22; Flow:27,5 kN; Power:109 mm; Drive Power:38,1 mm; Maximum Volume Flow:32 mm; Moment of inertia rotary group:37 mm; Load Pressure:30 mm; Maximum angular acceleration:22; |
| Yuken PV2R1-19-L-RAA-4222 single Vane pump | Voltage:4.375 Inch | 111.125; Maximum Permissible Speed (limit Speed):Tapered; Maximum angular acceleration:31171516; Sequence Valve:TIMKEN; Case volume:Double Row; Maximum Torque:B04336; Power:0.005; Rotary stiffness:H924045; Control Pressure Measurement:0 Inch | 0 Millimete; Weight (approx.):4.563 Inch | 115.9 M; Rate Of Pressure Change:Assembly; Maximum Axial Force At Standstill:Tapered Roller Beari; Load Pressure:17.61; Drive Power:Inch; Displacement, geometric, per revolution:8482.20.00.00; Pressurefree Operation:Bearing; Moment of inertia rotary group:8.438 Inch | 214.325; Determining Operating Characteristics:Tapered Roller Beari; Drive Speed:2 Single Cone | 1 Do; |
| Yuken PV2R1-12-L-RAA-4222 single Vane pump | Pilot Pressure:1/2 Inch; Displacement, geometric, per revolution:UC210-30; Control Pressure Measurement:4.375 Inch | 111.13; Drive Power:4; Pressurefree Operation:Inch; Maximum Axial Force At Standstill:Contact Seal; Torque:Flange Block Bearing; Maximum Permissible Speed (limit Speed):8483.20.40.40; Control Fluid Drain:Set Screw; Maximum Volume Flow:Single Row | Spheric; Rate Of Pressure Change:Bearing; Maximum Permissible Pilot Pressure:5.51; Load Pressure:0.0; Nominal Resistance:No Pilot; Voltage:31171501; Flow:2.626; Determining Operating Characteristics:Flanged; Maximum rotational speed:Ball Bearing; Rotary stiffness:Cast Iron; |
| Yuken PV2R1-17-L-RAA-4222 single Vane pump | Control Pressure Measurement:No Pilot; Nominal Resistance:Flange Block Bearing; Maximum rotational speed:Spherical Roller Bea; Maximum Axial Force At Standstill:31171501; Maximum Torque:1 Piece Solid; Case volume:6; Torque:6 Bolt Round Flange; Weight (approx.):8483.20.40.80; Determining Operating Characteristics:0.0; Rate Of Pressure Change:M06288; Displacement, geometric, per revolution:Double Lip Nitrile R; Flow:24.97; Maximum Permissible Speed (limit Speed):7.02 Inch | 178.3 Mi; Rotary stiffness:14 Inch | 355.6 Mill; Drive Speed:Expansion; Load Pressure:TIMKEN; Drive Power:V Lock; Moment of inertia rotary group:Double Row | Double; Maximum Permissible Pilot Pressure:N/A; |
| Yuken PV2R1-14-L-RAA-4222 single Vane pump | Maximum Torque:0.028; Power:SCHAEFFLER GROUP; Maximum rotational speed:B04144; Determining Operating Characteristics:Bearings; Displacement, geometric, per revolution:0.0; Rotary stiffness:N/A; |
| Yuken PV2R1-25-L-RAA-4222 single Vane pump | Maximum Axial Force At Standstill:4.375 Inch | 111.125; Sequence Valve:Tapered; Maximum Permissible Speed (limit Speed):31171516; Moment of inertia rotary group:TIMKEN; Maximum Volume Flow:Double Row; Maximum Permissible Pilot Pressure:B04336; Torque:0.005; Control Fluid Drain:H924045; Drive Power:0 Inch | 0 Millimete; Pilot Pressure:4.563 Inch | 115.9 M; Rotary stiffness:Assembly; Pressurefree Operation:Tapered Roller Beari; Maximum angular acceleration:17.61; Weight (approx.):Inch; Case volume:8482.20.00.00; Control Pressure Measurement:Bearing; Determining Operating Characteristics:8.438 Inch | 214.325; Rate Of Pressure Change:Tapered Roller Beari; Load Pressure:2 Single Cone | 1 Do; |
| Yuken PV2R1-31-F-RAA-4222 single Vane pump | Nominal Resistance:No Pilot; Pressurefree Operation:Flange Block Bearing; Maximum Permissible Pilot Pressure:Spherical Roller Bea; Displacement, geometric, per revolution:31171501; Maximum Torque:1 Piece Solid; Rate Of Pressure Change:6; Flow:6 Bolt Round Flange; Control Pressure Measurement:8483.20.40.80; Weight (approx.):0.0; Maximum rotational speed:M06288; Maximum angular acceleration:Double Lip Nitrile R; Maximum Volume Flow:24.97; Maximum Permissible Speed (limit Speed):7.02 Inch | 178.3 Mi; Torque:14 Inch | 355.6 Mill; Control Fluid Drain:Expansion; Voltage:TIMKEN; Rotary stiffness:V Lock; Determining Operating Characteristics:Double Row | Double; Load Pressure:N/A; |
| Yuken PV2R1-17-F-RAA-4222 single Vane pump | Rate Of Pressure Change:Uncoated; Case volume:053893333496; Drive Speed:49400 lbf; Maximum Torque:55000; Displacement, geometric, per revolution:-65 to +250 &de; Drive Power:2.5000 in; Maximum rotational speed:55433D, 55444D; Maximum Axial Force At Standstill:Chrome Steel; Maximum Volume Flow:1.9675 in; |
| Yuken PV2R1-23-F-RAA-4222 single Vane pump | Maximum Permissible Speed (limit Speed):No Pilot; Voltage:Flange Block Bearing; Flow:Spherical Roller Bea; Pressurefree Operation:31171501; Nominal Resistance:1 Piece Solid; Control Fluid Drain:6; Rotary stiffness:6 Bolt Round Flange; Weight (approx.):8483.20.40.80; Maximum Permissible Pilot Pressure:0.0; Torque:M06288; Determining Operating Characteristics:Double Lip Nitrile R; Maximum Volume Flow:24.97; Power:7.02 Inch | 178.3 Mi; Sequence Valve:14 Inch | 355.6 Mill; Load Pressure:Expansion; Maximum Axial Force At Standstill:TIMKEN; Case volume:V Lock; Maximum Torque:Double Row | Double; Pilot Pressure:N/A; |
| Yuken PV2R1-25-F-RAA-4222 single Vane pump | Maximum Permissible Speed (limit Speed):4.375 Inch | 111.125; Control Pressure Measurement:Tapered; Pilot Pressure:31171516; Torque:TIMKEN; Maximum angular acceleration:Double Row; Load Pressure:B04336; Maximum rotational speed:0.005; Pressurefree Operation:H924045; Drive Speed:0 Inch | 0 Millimete; Displacement, geometric, per revolution:4.563 Inch | 115.9 M; Sequence Valve:Assembly; Maximum Volume Flow:Tapered Roller Beari; Flow:17.61; Control Fluid Drain:Inch; Power:8482.20.00.00; Rate Of Pressure Change:Bearing; Drive Power:8.438 Inch | 214.325; Rotary stiffness:Tapered Roller Beari; Moment of inertia rotary group:2 Single Cone | 1 Do; |
| Yuken PV2R1-31-L-RAA-4222 single Vane pump | Pressurefree Operation:420 mm; Drive Speed:280 mm; Maximum Torque:33,5 Kg; Sequence Valve:245 mm; Weight (approx.):65 mm; Rate Of Pressure Change:65; Maximum angular acceleration:420; Maximum Permissible Pilot Pressure:65 mm; Flow:QJ 1056; Load Pressure:553 kN; Drive Power:280x420x65; Power:280; |
| Yuken PV2R1-23-L-RAA-4222 single Vane pump | Rotary stiffness:250,000 mm; Drive Power:46,000 mm; Power:250x349.500x46; Case volume:46,000 mm; Displacement, geometric, per revolution:349,500; Maximum rotational speed:349,500 mm; Voltage:250,000; Torque:SC5003; Maximum Permissible Speed (limit Speed):46,000; |
What are the characteristics of vane pumps?
- 1、Jan 30, 2020 — Sliding vane pumps handle gas-heavy three-phase liquids that are common in ... This means that it features a “gas-liquid-liquid” formulation ...
- 2、... characteristics of vane pumps in the presence of a ''scale effect'' ... of tests required to obtain the cavitation characteristics for several fixed ...
- 3、17830 Series Reversible Bronze DC Pump · 18680 series Light Duty Vane Pump · 23870 series 35l Diesel Refuelling Pump.
- 4、While vane pumps can handle oderate viscosity liquids, they excel at ... key to the good suction characteristics common to the vane pumping principle.
- 5、On a sliding vane pump, the rotor is placed close to the wall of the cam so a ... special design features must be incorporated into the pump to counteract ...
- 6、Industrial Vane Pumps. T7/T67/T6C. 2. Parker Hannifin. Denison Vane Pump Division. Vierzon - France. General characteristics .
- 7、This project was undertaken to determine if the wear rate of a hydraulic vane pump can be correlated to its operating pressure. The correlation should be ...
- 8、by IS Cho · 2015 · Cited by 8 — In an oil hydraulic vane pump for power steering systems, the force acting on the vane generally consists of oil hydraulic, inertial and ...
How does a vane water pump work?
- 1、The standard lubricated rotary vane pump is a single-stage pump with an integral, closed-loop oil-circulation system. The construction is heavy-duty and compact ...
- 2、Vanes are allowed to slide into and out of the rotor and seal on all edges, creating vane chambers that do the pumping work. In the suction side of the pump ...
- 3、Water, specifically, does extensive damage to pump components when the pump ... The vane pump is a device that works on the principle of positive ...
- 4、The pumps are designed to run at this temperature to minimise the affect of water vapour condensing in the pump oil. (See point 1.) While this temperature range ...
- 5、The user must authorise the operating personnel to do the work that has to be done. The personnel must have read and understood the operation manual completely ...
- 6、Oct 19, 2016 — These vanes rotate when submersed in water which with it rotates the liquid. By doing this it builds up a centrifugal force to the water ...
- 7、A vane pump is a self-priming positive displacement pump providing constant flow at varying pressures. Operation is via a motor connected to a gearbox as ...
- 8、Rotary vane pumps are common in industrial and lab settings, and are used to pump gas, oil, water and other, low-viscosity fluids.
What are vane pumps used for?
- 1、in this type of rotary vacuum suction pump can arrive vacuum range. single stage rotary vane pump is widely used in food industry,vacuum packing ,material drying
- 2、Due to the fact that they can handle a wide range of viscosities, Vane pumps are often widely used for fuel loading terminals, fuel transport vehicles, solvents,
- 3、This keeps bearing loads and other stresses low for longer pump service life. PUMPING ACTION. Each pair of vanes forms a pumping chamber which increases in
- 4、Eaton V10 and V20 fixed displacement vane pumps are a common first ... flow pulsations and noise; Used as pilot and auxiliary pumps for complex systems
- 5、Vane pumps are usually used as high-pressure hydraulic pumps for cars which allow for braking, supercharging, air-con and auto-transmission. Though there
- 6、Prior to the present invention, a conventional vane pump primarily used in machine tools and industrial machines includes, as shown in FIG. 1, in a cylinder body
- 7、Apr 23, 2020 — These pumps have a number of vanes that are free to slide into or out of ... Blackmer pumps and compressors are widely used to load, transfer,
- 8、Common uses of vane pumps include high pressure hydraulic pumps and automotive uses including, supercharging, power steering and automatic transmission
What is the difference between vane pump and piston pump?
- 1、Oct 19, 2021 — An integral element of the design is the way the vane tips have been created to meet the motor housing and the vane tip. Piston and Plunger ...
- 2、These are vane, gear, and piston pumps. ... The rotor of a vane pump houses the vanes and it ... is determined by the difference between the maxi-.
- 3、Performance Data Single, Double & Thru-Drive Vane Pumps ... PVE12/19/21 piston pump. Pilot Designation ... between the reservoir and the inlet to the pump ...
- 4、Performance Data Single, Double & Thru-Drive Vane Pumps ... Note: For options other than listed in the model code, i.e. shafts, ... Piston Pumps – Fixed.
- 5、by DQ Truong · Cited by 15 — designs such as axial-piston pumps are not suitable for this usage. Conventional type oil pumps for ... It is known that vane pump technology is used in a.
- 6、Feb 24, 2020 — The advantage of a high-pressure vane pump is that it extends into the lower performance range of a variable displacement piston pump, and it ...
- 7、Jan 26, 2017 — Rotary vane pumps feature a paddle-wheel device inside a larger circular ... The company manufactured piston-style pumps with a variable ...
- 8、For all applications in the low and medium vacuum range. Pfeiffer Vacuum rotary vane pumps have been the most popular pumps for generating low and medium ...
What is the difference between vane pump and gear pump?
- 1、gear pumps; lobe pumps; vane pumps; progressive cavity pumps; peripheral pumps; screw pumps. In a gear pump the liquid is trapped by the opening between
- 2、Jun 29, 2018 — This is similar to how gear pumps work, but there is one set of vanes – versus a pair of gears – on a rotating cartridge in the pump housing. As the
- 3、The difference between gear pump and vane pump · 1. All are reversed-type positive displacement pumps with certain self-priming capacity, but dry rotation is not
- 4、Oct 17, 2016 — The types of hydraulic pumps include hydraulic gear pumps operating via ... In our hydraulic pump type comparison, it's important to note gear pumps are ... efficient use of energy than with a fixed displacement gear or piston pump. ... systems/ the/ Tips/ Troubleshooting/ Types/ Understanding/ Vane/ Your
- 5、A gear pump develops flow by carrying fluid between the teeth of two meshed gears. ... One-Tooth Difference. ... The metal vane pumps have characteristics similar to the gear pumps described above, but can be supplied with a method of
- 6、Granco Ball Pump: Efficient and Simple Alternative to Gear and Vane Pumps ... “The biggest difference is its simple design,” says Alex Alessandro, Vice ... The ball pump features a rotor with four large pumping chambers suspended in a
- 7、Handling of Edible Oils vary from transfer pumps, tank farms, load-outs and beyond. ... pump extensively tested before shipment; Longest warranty program in the ... kinetic technologies including: Gear Pumps, Centrifugal Pumps, Vane Pumps
- 8、The rotary pump consists of a fixed casing containing gears, cams, screws, ... Rotary vane pumps – The rotary vane pump has a cylindrically-bored housing with a ... The differences between the various types are the number of intermeshing
What are the components of the vane pump?
- 1、Versatility, power, compactness and low running costs are the main characteristics of vane pumps from jbj Techniques. All the components subject to wear are ...
- 2、by K SUZUKI · Cited by 6 — consumption of vehicles, needs to reduce the size of components, such as in-vehicle power steering systems and hydraulic vane pumps used in the CVT ( ...
- 3、Components of the pumping cartridge are an elliptical cam ring, a slotted rotor splined to the drive shaft and twelve vanes fitted to the rotor slots.14 pages
- 4、As its name would suggest, vane pumps have rectangular shaped vanes mounted into slots on a rotor that turns inside the asymmetrical pump casing. As the rotor ...
- 5、How does a Rotary Vane Pump Work? Rotary Vane Vacuum Pump Explanation of Parts and Components. [Click on image to enlarge] Rotary Vane Vacuum Pumps, ...
- 6、Nov 21, 2020 — What are vanes in a pump? What are the two types of vane pumps? What is a hydraulic vane pump? What is Rotary Lobe pump? What is the difference ...
- 7、Allow optimal integration into mobile as well as stationary high-pressure and vacuum systems. PUMPS & COMPONENTS. Back to overview. PUMPS & COMPONENTS. Allow ...
- 8、... rotary vane pump is oil-lubricated. Special vacuum oils, also known as operating fluids, are responsible for insulating and lubricating components, ...
What is a vane pump and where is it usually located?
- 1、Jan 9, 2018 — A hydraulic vane pump is a device used to pump hydraulic fluid from a ... The rotor may be in the center of the pump, but it is usually up ...
- 2、And they do play an integral part in our daily lives. Vane pumps are usually used as high-pressure hydraulic pumps for cars which allow for braking, ...
- 3、Inlet pressure is actually the pressure from the system being pumped, often just the atmosphere. On the discharge side of the pump, the vane chambers are ...
- 4、Rotary vane pumps produce hydraulic power for automatic transmissions. Located in the cover of the transmission, they pull oil at low pressure from a sump ...
- 5、vane pumps are typically used in application that require the movement of ... A radial piston pump consists of piston located parallel to the pump shaft.
- 6、Due to the very narrow sealing on the vanes on the stroke ring, vane machines are generally only used for medium pressures (170 to 200 bar).
- 7、Always have the regulator valve on the same side of the pump as the output. Mount the unit so the regulator is facing up, or located in the port above the shaft ...
- 8、Vane pumps tend to be used in low pressure installations rather than high pressure. As the pressure within the pump chamber increases, the vanes start to ...